How to Change Bingo Flashboard Bulbs

Bingo flashboards frequently have bulbs that burn out over time. And, if you've never changed flashboard bulbs, it can be a little tricky. So, here's some helpful guidelines on how to change a bingo flashboard bulb:

Before you begin, TURN OFF ALL POWER TO THE FLASHBOARD! Changing bulbs while the power is on can be dangerous and can damage your entire bingo board .

Now, let's divide the flashboard into 2 parts, the "sides" and the "main body" of bingo numbers.

The "sides" of the flashboard can be opened by removing the appropriate screws from the front panel. Typically the left side of the bingo board containing the last number called and the bingo pattern, is on a hinged panel and should be swung open. After opening, slide out the covering panel (you may have to bend it a little outwards) to gain access to the bulbs. Change bulbs as needed.

The "main body" of the board can be accessed by removing all appropriate screws and then removing the plastic retaining strip between the low and high side acrylic. Push in the panel while grasping the strip and pulling it out slightly to the right. Once this strip is removed, the panels can be slid from side to side to uncover the bulbs. Change bulbs as needed.

Be sure to keep track of your screws! Once finished, slide the panels and strips back into place, and screw everything back into place.

Hopefully this helps. Remember, bingo machines and bingo flashboards can vary in design. For instance, some flashboards contain a "prize payout" section on the right side and some don't. Our instructions are meant as a guideline to help with the most common bingo boards in the industry.